Composite fiberglass hull and deck built with resin infusion molding system using bi-axial and unidirectional glass fabrics with Baltek end-grain balsa core
Blue gel coat finish with white waterline stripe
Fin keel
Spade rudder
Recessed transom
Folding boarding ladder on transom
When new, Waterline Systems faired the hull, keel and rudder for improved racing performance
Balsa cored fiberglass deck
Stainless steel bow and stern rails
Stainless steel stanchions
1 x 19, stainless steel wire, double lifelines
Boarding gates port and starboard
Teak toe rail
Stainless steel hand rails on coachroof top
2 x pair mooring cleats, 1 pair forward and 1 pair aft
Opening hatch over forward cabin
Sliding hatch with drop board over companionway
1 x pair of fairleads forward
2 x pair of jib tracks, 1 pair forward and 1 pair aft, each with a a line adjustable car and fairlead
Halyards and utility lines led aft to 2 x double line stoppers
Mainsail traveler in middle of cockpit
Tiller steering
Lazarette locker, with a vent on the lid, aft to port
2 x cockpit lockers, 1 to port and 1 to starboard, immediately forward of the main traveler
All Harken
2 x #32, 2 speed, ST halyard and utility
2 x #40, 2 speed, ST primary
Sleeps a total of 4 in 2 cabins. 2 forward of the main bulkhead and 2 in the saloon. Teak and holly cabin sole
Manual head with "Y" valve for discharge overboard or to holding tank
Sink located forward of the main bulkhead and to port
Shelves outboard port and starboard
Yanmar 14hp diesel
Saildrive transmission
2 x blade folding propeller
Engine control panel port side of cockpit
Engine throttle and gear shift lever starboard side of cockpit
Manual bilge pump
Electric bilge pump
Foot pump at head sink for fresh water
VHF, Icom, IC-M422 positioned in the aft bulkhead of the cockpit
Knot meter
Depth sounder
Breaker panel aft to starboard inside
Battery selector switch aft to starboard
2 x house batteries
Cabin lights
Navigation lights
Carbon fiber mast
Stainless steel rod rigging
Solid boom vang with mechanical control
Harken roller furler for headsail
2 x whisker poles
Sailtec hydraulic backstay with adjuster under the tiller in the cockpit
North 3DL, Kevlar mainsail (2006)
North 3DL, Kevlar/carbon 145% genoa (2011)
North 3DL, Kevlar 145% genoa (2006)
North 3DL, Kevlar 100% jib (2006)
North, asymmetric spinnaker (2006)
Winch handles
Boat hook
Tiller extension
Fortress anchor
10' chain
100' rode
Dock lines
Fenders
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
We have many other Swan yachts available for purchase around the world. Below are some of our latest listings, or click here to view all current listings.